|
The Everest 600 thermal retransfer printing process is a two-step process. First, a reverse image is printed on the back-side of the retransfer sheet. Then, the completed image is permanently adhered to the surface of specially coated CD, DVD, or Blu-ray Disc media. The whole process takes about one minute, and customers enjoy printed media with a variety of unique benefits, only available on the Everest 600.
600 dpi Print Resolution The highest print resolution in the industry delivers photo quality images, with sharpness and detail that are not available in other print technologies.
Permanent Images The retransfer print technology results in printed images that are scratch proof, water proof, fade resistant, UV protected, and will look good and last the life of the disc.
Edge-to-Edge Printing Using specially coated media, the Everest 600 is able to print from the outer edge to the inner hub, taking full advantage of the media surface.
Predictable Yield All Everest 600 ribbons have fixed yields which result in predictable cost per print and predictable print outputs. No more guessing on when consumables will need replacing. Rimage systems keep track of the remaining print yield and communicate the results to operators throughout the printing process.
Cost per Disc Predictable print yields also result in consistent cost per printed disc. When quoting customers for printed media, or budgeting for upcoming production, costs are known and consistent due to predictable print yields for each ribbon type and single formulations of each media type. Some print technologies may claim to offer a subset of these benefits, but the retransfer print technology available exclusively in the Everest 600 printer delivers all these benefits to all customers, small or large.
| Model: |
Rimage Everest™ 600 |
| Print Technology: |
Thermal Retransfer Printing |
| Print Resolution: |
600 dpi |
| Print Speed: |
60 seconds in photo and graphics mode |
| Print Modes: |
CMY, Monochrome Black |
| Print quality: |
Equivalent of 600 pixels per inch
|
| Media requirements: | Use Rimage Media Kits™ for optimum recording and print performance. |
| Ribbon requirements |
Monochrome (Black)
CMY (Cyan, Magenta, and Yellow)
|
| Ribbon capacity: |
Monochrome Ribbon: 1000 discs CMY Ribbon: 500 discs Retransfer Ribbon: 1000 discs |
| Interface: |
USB 2.0 |
| Power: |
100 - 120V, 500W or 220 - 240V, 500W 50 / 60 Hz (manual switching)
|
| Operating Temperature: |
59° to 86° F (15° to 30° C) |
| Humidity: |
30% to 80% non-condensing |
| Storage: |
-13° to 104° F (-25° C to 40° C) |
| Physical Size: |
Height: 9.7 in (24.6 cm)
Width: 9.5 in (24.1 cm)
Width (with left side cover opened): 23.8 in (60.5 cm)
Depth: 14.8 in (37.6 cm)
Depth (with printer tray extended): 22.25 in (56.5 cm)
Weight: 45 lb (20.4 kg)
Weight (with packaging): 50 lb (22.7 kg) |
|
|